Description Product
Biolubricant based from vegetable oil.

Features and benefits
BLC-100 is a biolubricant made from 100% recycled vegetable oil. If it had not been recycled, this oil
would have found its way into the environment, via sewers or public waste systems. The use of this product
therefore enhances the quality of both ground and air of Canada.

BLC-100 is excellent for eliminating rust, tar, dirt and grease (depending on use) while acting as a lubricant.
It is used whenever lubrication is required, to increase the lifespan of parts wherever there is a potential
problem with friction and/or corrosion. Its penetrating power facilitates undoing of corroded parts and
eliminates squeaks in door hinges, etc.

BLC-100 is a 100% biodegradable, non-toxic product that will not harm the environment, in contrast to
lubricants derived from petroleum products. BLC-100 has been tested by CRIQ as per the CEC-L-33-A93
methodology and was proven to be entirely biodegradable. In addition, a toxicity analysis showed that BLC-
100 is not toxic both before and after degradation. It will not dry, crack or evaporate, providing superior
protection for extended periods of time.

Applications
BLC-100 provides long term protection on steel from rust and corrosion for a variety of industrial,
construction, institutional, transportation, agriculture, recreation, marine, mining, aviation, railway and
oilfield applications. Special Non-Drying/Non-Hardening formula makes BLC-100 an ideal lubricant to use
on all metal to metal moving parts and surfaces.

BLC-100 is an effective lubricant and coating for use on Rollers, Chains, Cables, Wire Rope, Fasteners,
Drag Lines, Undercoating, Storage of Wear Parts or anywhere a non-toxic, environmentally friendly
lubricant, penetrant, or coating is desired.

· Prevents rust and corrosion
· Non Toxic
· Environmentally safe
· Will not dry, crack or evaporate
· Penetrates and lubricates
· Highly resistant to water wash-out
· Provides long lasting impervious film
· Seals out moisture

Packaging
311 g Aerosol
20L Pail
205L Drum

Chemical and physical Properties
Type : Fluid
Color/Appearance : Clear low odor liquid
Biobased content, ASTM D6866-08B :  84%
Density : 0,88 g/cm3 at 25°C
Viscosity : 5mm2 / sec at 40°C
Water solubility : Insoluble
pH : 7.0
Flash Point (ASTM D-93)  : > 130°C
Biodegradability, methodology  CEC-L-33-A93 : 100%, 21 days
Eco-toxicity : None
Toxicity of biodegraded products : 0
Health Hazard : 0  minimal